top of page
  • Writer's picturenataliecursio

GBA SP USB C

Another USB C tutorial. This time: the GBA SP.

Now, this has already been done by many. Makho has a vid using BlindEye's board to help the process.

However, I have a stack of six pin USB C female ports on hand always and wired it up manually.


Follow Makho's guide to remove the original charge port. Use the pictures bellow as a guide for the pinout. You only need to use one positive pad and one negative on the USB C port.

I used Makho's cad from Thingiverse as a bracket for the USB C port, held with a few drops of glue.





*** I recommend using USB A - C chargers only with this mod



1,502 views2 comments

Recent Posts

See All

2 Comments


Unknown member
May 06, 2022

Did you make the usb-c PCB yourself? I’ve bought one and wanted to just make them myself but I saw there were some small components there I didn’t know what they were.

Like
Unknown member
May 06, 2022
Replying to

Hi, I didn't use a pcb for this one, I wired to the pads

Like
bottom of page