top of page

ARC GBA Installation Guide

1. Solder to the GBA

Align the ARC GBA board to the GBA motherboard. Solder to the circled pads

Screenshot 2022-07-09 192314.png
Screenshot 2022-07-09 192347.png

*after soldering

Screenshot 2022-07-09 192429.png
2. Controlling the board

- Hold down start and tap a to switch colours

- Hold down start and tap up to change brightness

- Hold down up and a together to save the colour and brightness

Tactile board edition

The same as above, just solder the extra pin out points. Tactile domes and be removed by just peeling them off

tactinstall.jpg
bottom of page